How To Check and Use Serial Ports Under Linux

How do I check and configure serial ports under Linux for various purposes such as modem, connecting null modems or connect a dumb terminal?

Linux offers various tools and commands to access serial ports. Linux uses ttySx for a serial port device name. For example, COM1 (DOS/Windows name) is ttyS0, COM2 is ttyS1, and so on. USB based serial ports might use a name such as ttySUSB0. All these devices are located under /dev/ directory.

Display Detected System’s Serial Support Under Linux

Simple run the dmesg command:
$ dmesg | grep tty

[   37.531286] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   37.531841] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   37.532138] 0000:04:00.3: ttyS1 at I/O 0x1020 (irq = 18) is a 16550A

A note about USB based serial ports

USB to RS232 adapter cable connects from the USB port of a computer to a device. Such serial to USB adapter connects to devices for configuration or programming under Linux. Here is what the dmesg command displays when you enter USB adapter:
$ dmesg
## use grep command/egrep command to filter out USB devices ##
$ dmesg | grep -i serial
$ dmesg | grep -i FTDI

Listing and using USB serial ports on Linux

Here is how it looks when I attached USB device:
$ sudo dmesg | more

Use the setserial command to check and use serial ports

The setserial is a program designed to set and/or report the configuration information associated with a serial port. This information includes what I/O port and IRQ a particular serial port is using, and whether or not the break key should be interpreted as the Secure Attention Key, and so on.

Debian/Ubuntu Linux install setserial using the apt-get command/apt command

$ sudo apt install setserial

CentOS/RHEL/Oracle Linux install setserial using the yum command

$ sudo yum install setserial
Fedora Linux user try the dnf command:
$ sudo dnf install setserial

Using setserial to list serial ports and devices

Now we installed required package. Open the termial and then type the following setserial command:
$ setserial -g /dev/ttyS[0123]
If you get an error/warning that reads as “Permission denied,” try running the command as the root user. For example, I am running it using the sudo command/su command:
$ sudo setserial -g /dev/ttyS[0123]

/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: 16550A, Port: 0x1020, IRQ: 18
/dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3

The setserial with -g option help to find out what physical serial ports your Linux box has.

Listing or displaying USB serial ports on Linux

Try:
$ sudo setserial -g /dev/ttyUSB[01]

/dev/ttyUSB0, UART: unknown, Port: 0x0000, IRQ: 0

Linux serial console programs

Once serial ports identified you can configure Linux box and use serial ports using various utilities:

1. minicom– The best friendly serial communication program for controlling modems and connecting to dump devices
2. wvidial or other GUI dial up networking program – a PPP dialer with built-in intelligence.
3. Screen Command: Set Baud Rate [ Terminal Communication ]
4. getty / agetty – agetty opens a tty port, prompts for a login name and invokes the /bin/login command.
5. grub / lilo configuration – To configure serial port as the system console

Cocnlusion

You learned how to list or check serial ports including USB based adptor on Linux.

Reference: https://www.cyberciti.biz/faq/find-out-linux-serial-ports-with-setserial/